Flat solar panel
FKA is a Solar panel plan high efficiency, made with high quality materials and cutting edge technology.
The absorber is characterized by a pipe with development serpentine (or meander), which ends at the top in a manifold. This structure makes it very simplified hydraulic connections. The collectors meander, when installed in series, have made much more uniform than the collectors harp.
A further feature is the ability of the self-draining serpentine tube that makes the collectors FKA perfectly suitable also for solar systems emptying.
FKA available both vertically and horizontally allows multiple types of installations:
Roof tile floor Integrated Facade
The solar panel FKA is made from a copper absorber with coil tube and active collector tube.
- Safe and durable structure
- Resistant coating and selective absorber
- Efficient and safe heat transfer system
- Quality Pipe and flexible hydraulic connections
- Water connections resistant
- Protection against water and UV rays
- Quick and easy assembly
- Serpentine meander
- Often insulating layer
High yield with solar panel plan
The solar thermal collector FKA is characterized by a coil (or meander) with collector pipe in the upper part, a structure that simplifies the hydraulic connections.
The collectors meander installed in series have made much more uniform than the collectors harp. The thick layer of insulation retains heat for a long absorbed.
The copper tube is welded to the absorber by means of a modern ultrasound technique that allows a resistant junction between the tube and foil. To avoid heat losses, the collector FKA is equipped with a thick insulating layer of 2 cm in side and 6 cm.
Simplified Installation and Connections
The connections between the collectors are made through flexible hydraulic compensators specially developed to withstand high stresses due, eg., Thermal deformation, movements of the foundations of or fluctuations in temperature and pressure.
The connections with this system are simplified to the maximum and allow a high savings, with a lesser manpower and less piping for the hook. In addition, the entire system is more reliable and durable.
Features and Models
|Model||vertical FKA||horizontal FKA|
|Gross area||2,52 square metres2||2,52 square metres2|
|Width||1200 mm||2100 mm|
|Height||2100 mm||2100 mm|
|Thickness||110 mm||110 mm|
|Glass||Tempered insulated glass|
|Insulating||Mineral wool 6cm|
Installation vertical or horizontal
The manifolds can have FKA horizontal or vertical configuration and are supplied complete with brackets, fittings and mounting accessories.
E 'can choose between various mounting: flat roof, roof tile (with possible integration into tiles) or facciata.Le brackets and accessories supplied are suitable for any type of tile.
Fill out the form for a quote or information