Thin wall-mounted fan coil unit
Iris Slim is the thinnest of the wall fan coils in the Rossato range. It can be used both for heating and for summer air conditioning in the residential, commercial and hospitality sector.
The DC inverter motors allow low consumption and make it extremely silent.
Thanks to its reduced thickness of only 12,9 cm and to the elegant design, Iris Slim is easy to install and suitable for any type of environment.
Iris Slim is equipped with a large filter, mounted on the front, which allows you to filter the air while maintaining a high level of comfort and hygiene in the environment.
Components and performance characteristics
- Available in sizes 4
- Wall installation in a small thickness
- For heating and summer cooling
- Optimized for low temperature generators
- Space-saving with only 12,9 cm thick
- Manual or automatic adjustment of speed and power levels
- BLCD Inverter engine for reduced consumption
- Low noise fan
- Filter (Class G1 EN779) easily removable
- Manual or automatic speed adjustment
- Standard water and air temperature probe
- Possibility of master / slave management up to 24 units
Thin, elegant and silent
Iris Slim is a thin wall-mounted fan coil with a thickness of only 12,9 cm; it can be integrated into the blind compartments and very flexible in the installation, which makes it particularly suitable for renovations.
The sound impact is minimal compared to products of the same category.
This ensures maximum comfort in the home and can be used in all situations where it is necessary to maintain an extremely low noise level, such as in hotels, hospitals, offices and homes.
The Iris Slim fan coil is perfectly can be integrated into energy saving systems because, using hot water at 40-45 ° C, it can be combined with low-temperature heat generators, such as for example. heat pumps.
Iris Slim is equipped with a backlit display on the upper side of the fan coil.
The digital user interface can be installed on the wall or on the machine and has the following functions:
- Manual or automatic selection of the season
- Manual or automatic speed selection
- Standard water temperature probe
- Silent mode (nighttime)
- Possibility of integration in home automation systems (Modbus module)
- Master / slave functionality
Single or cascade use
Iris Slim can be used with a single unit or coupled with other Iris Slim.
Units connected by a single wall-mounted electronic control can be connected in cascade up to 24.
The use of several units connected to each other allows to manage uniformly the climate inside the house.
With the optional Modbus module it is possible to manage every single unit even remotely.
Fancoils for heat pumps
Iris Slim fan coils working at low temperatures are particularly suitable for combination with heat pumps or condensation boilers.
Thanks to the high yields that characterize it, it is possible to feed Iris slim with a lower temperature in heating, for example 40 ° C, and higher in cooling, for example 10 ° C: these working temperatures increase the winter COP and the EER summer of the heat pump.
(The variation of 1 ° C on the delivery temperature produces a variation of the 2% of the COP / EER.)
The high working efficiency of the heat pumps combined with the fan coils translates into low running costs of the plant or considerable savings.
Features and Models
|Iris 601||0,45 kW max||0,84 kW max||230/1/50|
|Iris 801||1,05 kW max||1,74 kW max||230/1/50|
|Iris 1001||1,81 kW max||2,64 kW max||230/1/50|
|Iris 1201||2,38 kW max||3,29 kW max||230/1/50|
Heating: Air 20 ° C - Water 45 ° Cb-b -Water output 40 ° C
Cooling: Air 27 ° C bs 19 ° C / bu-Water 10 ° C / 15 ° C