Radiant heating and cooling in a wooden house
Building type: Detached villa on 3 floors made of X-Lam wood
Heating / Cooling: Ecofloor radiant floor system G20
Generatore: Air-water heat pump Air Inverter 07m
ACS production: Heat pump water heater Air Combo PRO 300l
VMC: unit Punctual VMC SR50 for every single room
Construction company: Bioedil
Installer: Thermal water by Massimo Pascuttini
Construction manager: Domenico Battaglia
The heating and cooling system is realized with a floor radiant system combined with one heat pump air to water to inverter. The radiant system was built with the ECOfloor G20 system: EPS insulation panel with high performance graphite and low inertia liquid screed ensure a very rapid set-up.
Cooling with floor system
Il implant step the floor has been calculated so as to have the highest yield in cooling and at the same time to decrease the delivery temperature in the winter phase (with increase of the COP of the heat pump).
In the phase of cooling summer, the regulation with HCC control unit it acquires the temperature and humidity data in the environment and regulates the circulation temperature at a safety level, always far from the dew point. Environmental values are detected by the Caleon Clima thermostat / humidistat with touch screen interface.
In case of high humidity (over 50%) the control unit operates a Ecodry dehumidifier specific for radiant systems that maintains the ideal hygrometric level in the environment, so as to have maximum system yield and ideal comfort for the inhabitants.
Mechanical ventilation system
The plant system is completed with a high efficiency controlled mechanical ventilation system on time and for a single SR50 room.
Hot water production with heat pump
The domestic hot water is produced with an Air Combo PRO heat pump water heater from 300l in class A +.
“I take care of building houses” - explains Domenico Battaglia, owner of the construction company. "For the plant design I relied on the professionalism of the Rossato technicians who were able to offer me a complete and integrated solution". The synergy between all the professionals involved (the construction company, the consultant Rossato and the installer) meant that every phase was taken care of down to the smallest detail and "when the system was started up everything went smoothly".
"I made the first house with Rossato systems in the 2013. The customer is very satisfied with the radiant system. When in Milan there are -4 ° / -5 ° C outdoors, at home they can be almost short-sleeved, while when there are 35 ° C it feels like being in a mountain house! "- says Battaglia.