it Italian en English

Collector preisolatedPre-insulated manifold for thermal power plant

The pre-insulated manifold is used in thermal power plant, for the distribution of the heat transfer fluid in air conditioning systems.

allow you to have the same axis of the flow and return pipes, facilitating the installation of the relay group in thermal power plant, thus reducing clutter.

They are available in models with 5 bilateral attacks and allow connection to fittings for copper pipes and plywood.

manifold pumping groupsConnecting to pumping groups

The range of manifolds can be coupled to the pumping units Rossato Group, also with different attacks with convenient adapters.

Depending on the type of system, various hydraulic modules can be installed on the manifold, whether mixed or not.

Features and Models

  • Body made of zinc coated steel
  • insulation
  • Threaded
  • Temperature range: 0 100 ÷ ° C.
  • Max operating pressure: bar 6
  • Insulating box dimensions: mm 100x110
Outputs Connections Conn boiler Wheelbase Max Capacity Length
2 1 "¼ M 2 "M 125 mm 7,25 square metres3/h 625 mm
3 1 "¼ M 2 "M 125 mm 7,25 square metres3/h 875 mm
4 1 "¼ M 2 "M 125 mm 7,25 square metres3/h 1125 mm
5 1 "¼ M 2 "M 125 mm 7,25 square metres3/h 1375 mm
6 1 "¼ M 2 "M 125 mm 7,25 square metres3/h 1625 mm

Fill out form

Request information

For more information, fill out the form below.


invalid value
invalid value
invalid value
invalid value
invalid value
invalid value
invalid value
invalid value
invalid value
invalid value
invalid value
invalid value

Rossato Group Srl
Headquarters: Via del Murillo, km 3.500 - 04013 Sermoneta LT - Italy
registered address via Migliara 49, No. 9 - 04016 Sabaudia LT - Italy
Cap. Soc. € 119.900,00 iv - n. LT-107494 REA - VAT-CF IT01745300598

Timetables
From Monday to Friday
Morning 8: 30 - 12: 30
Afternoon 13: 30 - 17: 30