The sludge is used in systems where over the air, there are many impurities of all kinds, like grains of sand and metal particles.
These residues can cause serious consequences to the system as rust or worse, not realizing that these impurities with the passage of time may result in the complete closure of the plant. Therefore lower yields and higher maintenance costs.
Available in 3 models.
Features and Models
- Separator model for micro bubbles and impurities
- Horizontal type, brass.
- Ideal heating, solar and chilled water.
- No rust in the separation chamber without turbulence.
- Drain cock sludge placed in an eccentric position.
- Screw plug with emergency signal function.
- Position in vertical, internal thread from various dimensions.
- Max. Operating 10 bar.
- Max. Operating 120 ° C.
- Adding glycol of up to 50%.
- Maximum flow rate 1,5 m / s.
No dirt in your plant
The getters designed so that all the dirt that passes through them to come in contact with the surface of the rings.
The microscopic particles of dirt present in the liquid will adhere to these rings thus giving origin to a phenomenon of coalescence to larger bubbles. The larger particles due to their greater buoyancy will be ejected through an air chamber.
Reduction of dirt secured
The dirt horizontal vent device with built-in has been optimized for installation in horizontal pipes. And full of PALL rings to reduce water turbulence that ensure a perfect cleaning of the flow.
Each model provides the highest quality for the separation of impurities, able to protect the system from many risks.
|Connections||Kvs||Max Range *||Weight|
|1 "F||16,5 square metres3/h||2,3 square metres3/h||2,15 Kg|
|1 ¼ "F||32 square metres3/h||3,9 square metres3/h||3,05 Kg|
|1 ½ "||42 square metres3/h||5,2 square metres3/h||3,90 Kg|
To know the price of the dirt separator fill out the form below.
Automatically you will receive your price via email.