Heating and cooling with wall/ceiling system in only 15mm
Ecowall FIT isreduced thickness under-plaster wall or ceiling radiant system for winter heating and summer cooling.
The most important feature of Ecowall FIT is the small diameter of the pipe which reduces the thickness of the plaster to only 15mm.
With modules completely placed , Ecowall FIT provides a faster response of the system, a low thermal inertia and is made in operation in less than an hour.
- Radiant panels in only 15 mm of plaster
- Less than a hour reaction time
- Reduction of plaster cost from 40 to 50%
- Quick response to regulation systems
- Integrable with ECOwall Dry system
Components of the Wall and Ceiling radiant system
Support rails for installation circuits
The modules are constituted by the radiant tube PE-Xc-shaped coil and fixed on binary-stand.
The practical binary plastic has a step of laying 5 cm. The height of the guide is of only 9 mm, of which a thickness of 2mm below the tube which gives the drive a good rigidity and resistance.
The track is presented in modules 50 cm that can be extended according to need in a very simple way, thanks to the joint system to swallow nest. Small modules speed up and simplify the assembly operations and do not require site cutting.
The tube is fixed in the guide so perfect thanks to the grooved section of the track. The base is perforated to allow fastening to the support by means of dowels.
Tube with a diameter of only 8mm
The tube PE-Xc 8x1 consists 3 layers: the innermost layer PE-Xc (high density polyethylene) has a very smooth surface and ensures extremely low pressure loss. The outer layer has the function of oxygen barrier in order to avoid corrosion problems. The two layers are held together by a thin intermediate layer of polymeric material highly adhesive.
The high elasticity of the pipe allows you to preserve it from stress caused by thermal expansion inside the wall.
Long life, light weight, high strength at high temperatures and scratches are just some of the advantages of the PE-Xc 8x1
Curve holders for coils laying
To stabilize the curvature and shape the pipe, are used reggicurva reinforced plastic material.
The reggicurva has a tubular structure of 8mm diameter and ends with two shaped profiles to be embedded between the track and the tube in correspondence of each curve.
Thanks to reggicurva it has a perfect curvature of the pipe so as to eliminate the pressure loss of a coil to the other. Fill now the contact form to receive information or a quote from your local contact person.
Pipes for panels connection
The hydraulic circuits of the ECOwall FIT panels are interconnected to form the main circuits, through connection backbones made with pre-insulated PEX AL PEX 20 x 2 mm pipe.
The tube provides flexibility and chemical resistance typical of polyethylene combined with the high strength of the metal. The result is a tube very resistant to high pressures, temperatures and corrosion.
The tube is available in two colors, red and blue, which are useful in the installation phase to distinguish the lines of supply and return.
Collector for perfect heat distribution
The modular collector, thermostatically controlled with display of flow rate, has been optimized for improve the thermal performance of radiant systems providing a low pressure loss.
A fundamental characteristic of the collector is the absolute impregnability from sediment and from any type of corrosion, which guarantees a long life.
- Quick Links for easy installation
- Resistance to chemicals
- Very low pressure drop
- Anti-condensation system
Press fittings for secure connections
Ensure low pressure drop and are approved DWGW, KIWA and ÖVGW.
Cassette collectors slim and stylish
The cassette for the ' accommodation of distribution manifolds is the built-in type, designed for easy positioning the collectors of radiating systems.
Manifold and box are arranged in the center of the building in order not to have too long circuits and to simplify the thermoregulation of the rooms, when crossed by many adductions.
The box is made of galvanized sheet metal, with electro-welded mesh for the plasterable parts, rails for fixing the manifolds, height-adjustable feet, frame and flat-edge door painted in white.
Excellent union plant wall and ceiling
Ecowall FIT is a modular system suitable for every architectural solution.
The highly flexible and malleable tube may be shaped as needed to adapt to different geometries of the walls.
The installation of the system on the perimeter walls allows to exploit the effective barrier against heat and cold.
To increase the radiating surfaces, exploiting both the walls and the ceiling in the same environment, you can integrate with a ecowall FIT system plasterboard ecowall Dry.
We guarantee greater security
To demonstrate the reliability of the systems, all radiant systems Rossato Group are covered by insurance for 10 years (RC products with leading companies)