it Italian en English

Dry underfloor heating


Plant low floor to dry

ECOFLOOR slim is the radiant system for the low-floor heating and winter and summer air-conditioned building.

The ECOFLOOR Slim radiant panels have a thickness of only 18 mm which makes the system especially suitable for the application on existing floors. ECOFLOOR Slim is quick and easy to install and allows you to improve the site logistics.

The low-floor radiant system, as well as being a very good heating system for the winter, it is also the solution for summer cooling. With a single system, low consumption and invisible, you can get comfort and savings in all seasons.

Radiant system plasterboard slim

Technical features

- Special plaster fiber flooring
- Fire resistance, class E
- Moisture barrier according to UNI EN 1264-4
- Interlocking for easy connection of several modules
- Resistant to high temperature deformation (80 ° C)
- Certificates according to green building guidelines
- Joggles tube holder with the possibility of variable pitch
- High resistance to wear and foot traffic
- Thickness ideal content for low profile systems.

The installation of the panels can be performed fast and accurate thanks to the additional optional accessories for proper installation. The compact structure dell'ECOfloor slim allows the realization of a plant floor radiant even with little thickness available.


Fast heating and cooling

ECOfloor Slim occupies only 21 mm thick, Excluding the floor and additional insulation.

In addition to the great advantage of the low thickness of the system, the absence of traditional screed gives the system ECOFLOOR Slim a reduced thermal inertia.

This ensures a faster response to the adjustment, both in heating and cooling, and a more rapid operation of the system.

The result is more comfort more quickly.

Nothing screed to apply

Saves on time and costs on site

The construction of a plant may be low at first glance more expensive than a standard radiant system.
In fact, the structure of ECOFLOOR Slim with dry screed provides a huge cost savings in construction.

The realization of the traditional screed, in fact, involves long lead times and increased investment in terms of people, resources and costs, without excluding any issues related to the installation.
Moreover, the drying of the screed can require more than three weeks, resulting in longer waiting for the customer.

low heatingWhere can I install the low-floor system

ECOFLOOR Slim integrates into any architectural environment, from new buildings to renovations, for all sectors such as residential, public buildings, offices and service sectors.

Installation in new buildings

ECOFLOOR Slim is being used in all those applications where loads are required and space is limited.

Buildings under renovation:

The thickness of only 21 mm (excluding floor), making it particularly suitable for ECOFLOOR Slim restructuring accomplishments in lofts or on existing floors.

modular panels, lightweight and easy to install

The special ECOFLOOR Slim panels are made from plaster fiber with a layer thickness of 18 mm milled for the housing of the hydraulic circuits. To cover the entire surface of the floor panels are available in different sizes, modular among them:

  • Panel for underfloor heatingPanels with milling characterized by a linear geometry specially designed to enable the drafting of the coils at the same time, with a linear and curvilinear, and easy connection to the supply lines.

  • Panel heating Floor CleaningPanels with indented milling, are available in two versions with step 100 50 mm and mm: this last is particularly useful in the adduction areas near the manifold, such as in lobbies and hallways, where it is necessary to stay in a small space many tubes of connection to different environments.

The other components of the system

slim tube AL-PE-RTTube high strength
The PE-RT pipe is a pipe 12 mm ideally plastic surfaces for radiant systems.
The inner tube is made with a special PE-RT is resistant to high temperatures.

Ay pipe adapter

Connection fittings
The special Y-joint allows you to connect to each output from the collector two circuits radians.
The use of joints can reduce installation costs and at the same time the dimensions of the manifold, while maintaining the functionality of the system.

Modular manifold

Distribution manifold
The modular manifold of new conception, with the number of outputs from the variable to 2 18, is connected to the hydraulic circuit, thanks to special fittings button and without the need of special tools. The calibration of the system is greatly simplified thanks to the graduated scale on the individual flow meters flow.

cassette collectorsCassette collectors
The mounting box is designed to position with ease the distribution manifolds of the radiant systems. Includes Mounting rails collectors and height adjustable feet.

band perimeter radiantBanda perimeter insulation
The band in polyethylene, placed between walls and the radiant panels, has the function to absorb the expansion of the screed and to obtain a good thermal and acoustic insulation. It 'made of special materials that make it resistant to mold. for finishing
To complete the system a range of accessories and materials required for the proper installation. As the adhesive sealant PU 45 in cartridges, the primer M for existing floors and the powder mixture for finishing leveling.

Get information, documents, prices

Rossato Group Srl
Headquarters: Via del Murillo, km 3.500 - 04013 Sermoneta LT - Italy
registered address via Migliara 49, No. 9 - 04016 Sabaudia LT - Italy
Cap. Soc. € 119.900,00 iv - n. LT-107494 REA - VAT-CF IT01745300598

From Monday to Friday
Morning 8: 30 - 12: 30
Afternoon 13: 30 - 17: 30