Inverter Heat Pump Air Duct CN
Inverter Air CN is the ducted heat pump for heating, cooling and domestic hot water production.
The machine is an advanced system that takes advantage of the high efficiency 70% to 100% renewable energy (eg 100% with power. Photovoltaic). These heat pumps are designed using the technology DC inverter.
La DC inverter technology It allows to change the unit's power supply frequency. In this way the heat pump always operates at the optimum power, with an automatic modulation of power according to actual needs
Channeling the heat pump
With the innovative ducting system, Air Inverter CN can be installed inside the building.
This type of installation improves the COP of the heat pump, since the extracted air can be taken from basements or closed rooms, therefore warmer than the outside air.
Thanks to the snail, that is the part that encloses the fan, the Air Inverter CN heat pump is already prepared for ducting without the need for accessories or special charges for the installer.
The installation inside is very popular also for aesthetic reasons, where you want to avoid the external presence of the machine, for example in historical centres or in areas below architectural or landscape constraint.
High performance with Air Inverter
Air Inverter ensures particularly high seasonal performance, both in hot than in cold.
The seasonal coefficients of performance SCOP and SEER represent the relationship between the need for heating / cooling and the annual consumption of electricity for heating / cooling.
The criterion of measurement for SEER and SCOP is very reliable and allows to determine more accurately the performance of the system during the entire calendar year, measuring in different operating conditions.
Seasonal high coefficients of performance are the only real guarantee of reduction of operating costs.
High efficiency with DC inverter compressor
The DC inverter compressor is the heart of the heat pump.
The inverter technology allows to change the power supply frequency of the electric motor that drives the compressor, allowing to operate proportionally to the actual needs of the plant.
Low consumption with the permanent magnet pump
The hydraulic circuit is completed by circulator with EC motor with permanent magnets and electronic regulation.
The circulator technology allows automatic modulation of the water flow according to the request and the load losses of the system.
In this way you avoid wastage and unnecessary stress to the piping and other components installed and helping to ensure the high efficiency of the unit.
Fans with variable speed
The fans are set not to exceed the 70% of the maximum speed, while keeping available a 30% only used in the case in which the machine will need, such as in the case of very high temperatures.
This device has been designed to ensure greater savings and reduced noise, especially in the evening and night hours.
Flexible electronic control
The electronic control via the display on the machine allows you to harness the energy in the required amount and efficiently in the external conditions and the needs of the building, automatically managing the operation of the unit.
The display allows you to set and display parameters with ease of operation.
Features and Models
|Model||Pot fridge||EER||Pot term.||COP||Diet|
|20 T||19,4 kW||3,46||19,60 kW||3,69||400 / 3 / V 50|
|24 T||25,4 kW||3,46||23,80 kW||3,61||400 / 3 / V 50|
|30 T||32,1 kW||3,08||30,30 kW||3,23||400 / 3 / V 50|
Terms of reference:
Cooling: A35 / W18 - Heating: A7 / W35 (EN 14511)