it Italian en English

Geothermal inverter heat pump

Description

Geothermal heat pump inverterActea SI is the geothermal inverter heat pump suitable for heating and cooling and the production of sanitary hot water with integrated accumulation.

The range, available in models from 6 9 19 in kW, allows you to cover many needs: feeding radiant systems or for heating and air conditioning systems with radiators, heating swimming pools.

The intelligent electronics enables you to adapt the operation to outside weather conditions while significantly reducing energy consumption.

Heating heat pumpcoolingWater and health

Geothermal heat pumpStable output with geothermal energy

ACTEA geothermal heat pumps extract energy from the ground or from the groundwater and transfer it directly inside the house.

The exploitation of geothermal energy allows to obtain steadier outputs, thanks to the small heat swinging underground.

This heat is used thanks to a tube immersed in the soil, where inside circulates a fluid (water or glycol water) at a temperature below that of the soil. This tube is called a geothermal probe.

Geothermal heat pumps

The probes for the heating

There are three methods of installation:

  • closed horizontal development, with digging depth of 1,2-1,5m and an absorbing surface or 2 3 times greater than the surface to be conditioned
  • closed loop vertical development, with drilling depth from 30 100 to m
  • open circuit, which uses water from groundwater and returns through a well.

geothermal heat pump inverter technology

The all-in-one heating system

The units Actea are designed and manufactured in Italy according to high standards of quality and safety. All you need in a heating central is included in one device.

  • Coloured display for temperatures set and management
  • Two inverter class A circulators on user side and source side
  • Integrated insulated inertial storage tank 75 liter
  • 3 exchangers specific for geothermy
  • Electronic thermostatic valve
  • Electrical heater management
  • High efficiency inverter compressor/s
  • Extensive modulation of the power output (20-100%)
  • Completely acoustically insulated
  • simple systems management with dual temperature
  • Maximum temperature (° 60 MT) and (65 ° HT)

It will be enough to connect the pipes for heating, cooling and domestic hot water.

Compressor pump inverter

High efficiency with technology Inverter

Actea SI is equipped with DC Inverter compressors and inverter circulators in class A with permanent magnet.

Inverter technology enables the heat pump to consume only the power required to reach the desired temperature and then be able to keep it constant.

As a consequence there's is a sensible reduction in fuel consumption, a significant increase in seasonal efficiency, silence operation and longer life of the heat pump.

-> Contact us for information or a quotation

Actea si displayGeothermal intelligent temperature control

Actea SI is equipped with a large LCD touch screen that allows you to manage and adjust the temperature and the parameters of the heat pump.

Set Point storage tank: Through the display you can set the temperature to be reached in the integrated tank, both in summer and winter.

Set point summer / winter: the advanced electronics allows to adapt automatically the temperature to the outside temperature.

The electronic control also allows to manage in a simplified manner any integrative elements in the plant, such as eg. a boiler or an electric resistance.

Features and Models

Model Cooling capacity * EER Thermal power COP Diet Gas Max Temp
MT 08M 9,5 kW 5,9 8,6 kW 4,20 230 / 1 / V 50 R410a 55 ° C
HT 08M 9,5 kW 6 8,6 kW 4,50 230 / 1 / V 50 R134a 65 ° C
MT 14T 14 kW 5,8 13,2 kW 4,25 400 / 3 / V 50 R410a 55 ° C
HT 14T 14 kW 5,9 13 kW 4,25 400 / 3 / V 50 R134a 65 ° C
MT 18T 19 kW 5,8 18,8 kW 4,20 400 / 3 / V 50 R410a 55 ° C
HT 18T 19 kW 6 18,7 kW 4,52 400 / 3 / V 50 R134a 65 ° C
MT 26T 27,7 kW 5,9 26 kW 4,25 400 / 3 / V 50 R410a 55 ° C
MT 36T 38 kW 5,8 36 kW 4,30 400 / 3 / V 50 R410a 55 ° C
MT 43T 45,3 kW 5,9 44 kW 4,50 400 / 3 / V 50 R410a 55 ° C
MT 50T 52,3 kW 5,8 52 kW 4,45 400 / 3 / V 50 R410a 55 ° C
MT 60T 63,1 kW 6 60 kW 4,50 400 / 3 / V 50 R410a 55 ° C
MT 73T 76,5 kW 5,8 74 kW 4,42 400 / 3 / V 50 R410a 55 ° C
MT 90T 94,7 kW 5,9 90 kW 4,51 400 / 3 / V 50 R410a 55 ° C

Terms of reference:
Cooling: A35 / W18 (Eurovent) - Heating: W10 / W35 (EN 14511)
* Cooling capacity calculated with rotational speed of the compressor to the 90%

Fill out the form for a quote or information

Rossato Group Srl
Headquarters: Via del Murillo, km 3.500 - 04013 Sermoneta LT - Italy
registered address via Migliara 49, No. 9 - 04016 Sabaudia LT - Italy
Cap. Soc. € 119.900,00 iv - n. LT-107494 REA - VAT-CF IT01745300598

Timetables
From Monday to Friday
Morning 8: 30 - 12: 30
Afternoon 13: 30 - 17: 30