it Italian en English

Dehumidifier for radiant cooling

Description

dehumidifierThe fixed ducted dehumidifiers of the series ECODRY CN +, are designed for installation in false ceiling and are designed to be combined with cooling systems with radiant panels, floor, wall and ceiling.

Available in DC version with fridge and standard group. The dehumidifiers of the DC series are different from the standard models for a variant on the cooling circuit.

This variant allows to dehumidify the air treated and simultaneously to cool it, avoiding the formation of condensation, in order to have an effective integration into the refrigeration plant radiant power. One feature that is particularly advantageous in radiant systems in the floor.

dumidificatore featuresdesign features

CN + dehumidifiers are designed and manufactured in Italy according to high standards of quality and safety.

- Dehumidification capacity between 20,8 48,2 and l / 24h
- Operation with temperatures 10 ° C to ° C UR 30 40 90% to%
- Addition of neutral air (isothermal) Or of cooled air in the versions DC
- Operation with continuous dehumidification
- Reciprocating compressors on anti-vibration
- Evaporator and condenser low-loss air side
- Pre / post cooling high heat exchange coils
- Fans with three-speed motors
- DC Fans with high efficiency models from 600 m3 / h
- Displaying operating parameters
- Sheet metal works in white prepainted
- Horizontal installation in ceiling
- Complete with snorkels Plenum for canalization unit

operating CN

Dehumidification for radiant systems

Dehumidifiers for radiant systems ECODRY CN + guarantee dehumidification to neutral air, ie at the same temperature at which it is withdrawn. so they are also called deumificatori isothermal.

ECODRY CN + handles very small air flow rates so as to avoid annoying currents, typical of traditional air conditioning systems thus guaranteeing maximum environmental comfort.

fan dehumidifierVentilation centrifugal supply fan

The fan is centrifugal type, double inlet forward curved blades, with three-speed motor directly coupled.

The air is sucked by the fan from the rear of the unit, passes through the filter in the order, the battery of pre-cooling, the cold exchanger (evaporator), the heat exchanger (condenser), the heat exchanger of the post-cooling and the fan. Subsequently air is returned to the environment by a canalization and distributed through vents.

Features and Models

Model
Deum. *
Absorb. Port. air Temp work Pot.frigo Height width. prof. mm Weight
CN + 300 20,8 l / g 320 W 250 square metres3/h 10 ÷ 30 ° C - 242 - 453 - 600 35 Kg
CN + 300DC 20,8 l / g 320 W 250 square metres3/h 10 ÷ 30 ° C 1240 242 - 453 - 600 37 Kg
CN + 600 48,2 l / g 750 W 600 square metres3/h 10 ÷ 30 ° C - 331 - 650 - 810 52 Kg
CN + 600DC 48,2 l / g 750 W 600 square metres3/h 10 ÷ 30 ° C 3360 331 - 650 - 810 55 Kg

* T = 25 ° C RH (HR) =% Water 55 15 ° C

Hydraulic and cooling circuit
standard version

dehumidifiers CN standard circuit

1. Air filter
2. Pre cooling battery
3. Evaporator
4. Compressor
5. Capacitor
6. Post radiant cooling
7. Fan
8. Exhaust gas
9. Body rolling

Hydraulic and cooling circuit
DC version

Dehumidifiers CN refrigerant circuit

1. Air filter
2. Pre cooling battery
3. Evaporator
4. Compressor
5. -
6. -
7. Fan
8. Exhaust gas
9. Body rolling

Fill out the form for a quote or information

Rossato Group Srl
Headquarters: Via del Murillo, km 3.500 - 04013 Sermoneta LT - Italy
registered address via Migliara 49, No. 9 - 04016 Sabaudia LT - Italy
Cap. Soc. € 119.900,00 iv - n. LT-107494 REA - VAT-CF IT01745300598

Timetables
From Monday to Friday
Morning 8: 30 - 12: 30
Afternoon 13: 30 - 17: 30