it Italian en English

Home mechanical ventilation


Altair CPAltair CP is the system of mechanical ventilation for single dwelling. Small in size is capable of efficiently changing the air in your home.

Altair CP is the first mechanical ventilation system for studios that does not require ducts, or masonry, or the condensate drain.

It 'easy to install and use with the handy remote control.
Breathe fresh air and cool even with the windows closed with mechanical ventilation system CP 100 - CPX 100 - CP 200 - CPX 200

Ventilation for single dwellingTechnical features

- Nominal flow 100 - 200 m3 / h
- Compact size and height lowered
- Horizontal installation on the floor or ceiling
- Heat exchanger made of polypropylene cross flow
- High efficiency in sensible heat recovery (up to 95%)
- Centrifugal fans with low power electronic engines
- Class G2 Filters for air extraction
- Class Filters F6 low pressure drop for fresh air
- Plug-n-play connection to the mains
- Automatic defrost function of the heat exchanger
- Function of automatic by-pass
- Standard setting microprocessor CTR
- Adjusting evolved microprocessor CTRX
- Maintenance facilitated by the removable panel

Compact ventilation systemVMC individual

The unit is made of white painted sheet metal. The design is simple but elegant. The accessibility is done easily from below.

The access to filters, fans and the heat exchanger, is facilitated by the presence of removable panels which allow to operate free from any obstacle.

The extensive use of sound absorbing material together with the use of oversized fans, reduce the level of sound power at exceptionally low levels.

remote controlevolved command repositioned

And 'possible to combine the mechanical ventilation system Altair CP the advanced control with an elegant display that can be installed in an area convenient for the user control.

The menu is easy to use for basic configuration of the unit (manual or automatic, programming time slots, setting temperature and humidity).

silent dehumidifier

Low noise

The acoustic structure of Altair CP units ensures absolute quiet operation.

The maximum efficiency and quiet operation of the ventilation system is achieved thanks to a complete air distribution system with silencers output and following the recommended design criteria.

The extensive use of sound absorbing material together with the use of oversized fans, reduce the level of sound power at exceptionally low levels.

Access to Class AProperty for Class A

The installation of a high efficiency heat recovery unit housing allows access to energy classification Class A, Thereby increasing the value and creating the conditions for it can be preserved over time.

Install a heat recovery Altair, then, in addition to ensuring healthier environment, it is also on the property investment.

In the CP and CPX unit fans are of electronic type with brushless permanent magnet motor with built-in inverter, and in fact provide high performance by optimizing electricity consumption and reducing noise.

Features and Models

Model air flow Microprocessor Diet Power fans
Recovery efficiency
sensible heat *
Height width. prof. (Mm)
CP 100 100 square metres3/h CTR 230 V 21 W 95% 200 - 850 - 500
CPX 100 100 square metres3/h CTRX 230 V 21 W 95% 200 - 850 - 500
CP 200 200 square metres3/h CTR 230 V 40 W 91% 270 - 1000 - 500
CPX 200 200 square metres3/h CTRX 230 V 40 W 91% 270 - 1000 - 500

* Reference conditions: Tbs fresh air-5 ° C; external 80% RH; Tbs environment 20 ° C; 50% RH environment; 50% of the nominal air flow

Fill out the form for a quote or information

Rossato Group Srl
Headquarters: Via del Murillo, km 3.500 - 04013 Sermoneta LT - Italy
registered address via Migliara 49, No. 9 - 04016 Sabaudia LT - Italy
Cap. Soc. € 119.900,00 iv - n. LT-107494 REA - VAT-CF IT01745300598

From Monday to Friday
Morning 8: 30 - 12: 30
Afternoon 13: 30 - 17: 30