Air-water heat pump Air Inverter II
Air Inverter II is the new heat pump for outdoor installation for heating, cooling and domestic hot water.
It can be combined with fan-coils, radiant panels, accumulators for hot water and solar systems.
The Air Inverter II is a high-performance heat pump with state-of-the-art technology and peculiarities to ensure maximum operational efficiency.
It is available in 7 sizes from 5 kW to 16kW with single-phase and three-phase power supply.
It works with wide operating ranges from -25 ° C to external 46 ° C and with discharge temperature up to 60 ° C.
Air Inverter II fits perfectly to radiant and fan coil systems in both new and refurbished buildings and can be used for heating of swimming pools.
New R32 refrigerant
The new range of Air Inverter II heat pumps is loaded with R32 refrigerant gas, to guarantee high performance with low environmental impact, in advance with the requirements of the European Regulation EU f-gas regulation (517 / 2014).
- Low GWP or lower carbon dioxide emissions
- Better performance in extreme conditions
- Lower refrigerant charge
- High heat transfer coefficient
Protection against ice
The advanced anti-ice system (under-cooling) prevents the formation of ice at the base of the external battery, minimizing the defrost cycles and avoiding drops in the heat pump output.
The result is very high seasonal efficiency.
High tech components
- Twin Rotary BLDC Inverter Compressor
- Electronic Thermostatic Valve
- DC Brushless fans with inverter technology
- Anti-accident aerodynamic grids
- Digital central control and programming
- Exchangers with increased exchange surface
- Finned coil with special hydrophilic treatment
- Dynamic management of defrosts
- Adjustment with sliding temperature
- Integrating resource management in heating
- Electrical backup system
- Removable digital user display
- Anti-vibrating feet
BLDC Compressor Inverter High Efficiency
The Air Inverter II heat pumps are equipped with the latest Twin Rotary BLCD compressor.
The speed of rotation of the compressor is modulated precisely according to the plant's demand; this reduces energy consumption by more than 30%.
Advanced compressor technology keeps the desired delivery temperature stable, ensuring maximum comfort for the user.
Permanent magnet circulator
The hydraulic circuit is completed by the EC motor pump with permanent magnets and electronic regulation.
The circulator technology allows automatic modulation of the water flow according to the request and the load losses of the system.
This will avoid wasting and unnecessary stress on the piping and other components installed, thus ensuring the high efficiency of the unit.
Silent and efficient
With electronically controlled variable speed DC brushless fans
Air Inverter II is very quiet even at full capacity.
The fans are housed in aerodynamically shaped nozzles and covered by safety grilles.
The blades have increased dimensions to reduce the number of revolutions and minimize the sound level.
These design features guarantee maximum silent operation with reduced energy consumption.
Remote control of the heat pump
The Air Inverter II has a large, backlit LCD display from which you can view the status and active functions of the heat pump in real time.
The interface is modern, multilingual with intuitive icons and easy-to-use curtain menu.
It is installed inside the home and can function as a normal room thermostat.
Customizable screens allow you to read and modify operating parameters and settings, such as:
- Desired room temperature
- Set flow temperature
- Desired ACS Accumulation Temperature (Hot Water)
Features and Models
|USA B||Pot fridge *||EER||Pot term.||COP||Nutrition||Width. Prof. Alt (Mm)||Shipping Weight
|05 M||4,6 kW||4,82||4,65 kW||5,01||230 / 1 / V 50||1210 - 402 - 945||0.83 lbs|
|07 M||6,45 kW||4,65||6,65 kW||4,94||230 / 1 / V 50||1210 - 402 - 945||0.83 lbs|
|09 M||8,00 kW||4,16||8,60 kW||4,60||230 / 1 / V 50||1210 - 402 - 945||0.83 lbs|
|12 M||12,0 kW||4,78||12,3 kW||4,81||230 / 1 / V 50||1404 - 405 - 1414||0.83 lbs|
|12 T||12,2 kW||4,83||12,3 kW||4,84||400 / 3 / V 50||1404 - 405 - 1414||0.83 lbs|
|16 M||15,5 kW||4,45||16,3 kW||4,45||230 / 1 / V 50||1404 - 405 - 1414||0.83 lbs|
|16 T||15,5 kW||4,27||16,3 kW||4,45||400 / 3 / V 50||1404 - 405 - 1414||0.83 lbs|
Terms of reference:
Cooling: A35 / W18
Heating: A7 / W35 (EN 14511)