Heat pump Inverter with integrated storage

Description

Air Inverter II - T is the new inverter heat pump with integrated storage for heating, cooling and domestic hot water.

Air Inverter II T is composed of an external unit with very high efficiency and a box that integrates the storage tank for the production of domestic hot water. An elegant and innovative design makes Air Inverter II T suitable for installation in any building minimizing space and optimizing architectural integration building.

Available in 7 sizes from 4kW to 16kW with single-phase and three-phase power supply.
It works with wide operating ranges from -20 ° C to external 46 ° C and with discharge temperature up to 60 ° C.

Air Inverter II - T adapts perfectly to systems with radiant panels, fan coils, storage tanks for domestic hot water and solar systems. It is suitable both in new buildings and in the event of energy requalification in single or multi-family residential areas.

Get more information about your email

The heat pump in the box

The Air Inverter II - T heat pump consists of two sections:

A tower piece of furniture that contains the main hydraulic components for the climate system and ACS.
The silent outdoor unit with extremely small dimensions.

The advantage of the integrated heat pump in the cabinet is that minimizes clutter and optimizes architectural integration.

A complete box of everything

The whole unit is pre-assembled and tested. The cabinet and the outdoor unit can be installed at different times depending on the construction times of the building and the execution of the system. Each module has been designed and studied to simplify and speed up the installation.

Internal tower unit

1) ACS 280l Vetroporcellanato accumulator with external charge
2) 8l system expansion vessel
3) Integral inertial storage 30l (optional)
4) Electric heater 2 kW for anti-legionella cycle
5) Hydronic module with electrical panel
6) Solar exchanger for sanitary (optional)

Solar Exchanger for Sanitary

In the presence of the solar exchanger (optional), the solar source is always considered as preferential and therefore activated first for the production of hot water. In the absence of the appropriate irradiation and temperature conditions, the heat pump will start working.

Receive information and documentation on your email now

Integration for solar thermal systems

Air Inverter II - T can be combined with the plate heat exchanger dedicated to the connection of solar thermal systems to manage the domestic hot water production.

The kit consists of a circulation unit, a control unit, an 18l expansion tank and a braze-welded stainless steel plate exchanger for the production of domestic hot water.

In the production of ACS the system always prefers the economically most convenient source among those available. The solar source is always considered as preferential and for this reason it is activated first, when there are the appropriate conditions of irradiation and temperature. In the absence of the solar contribution, the heat pump will be used as the main generator.

Air Inverter - II T the high efficiency heat pump

MINIMUM OVERALL DIMENSION AND MAXIMUM INTEGRATION

• Applications in single-family and multi-family residential buildings
• Maximum architectural integration
• Indoor units equipped with numerous system components
• Simplified and faster installation

HIGH EFFICIENCY

• Components designed to achieve high COP values
• Classes A ++ and A +++ according to ErP regulation
• Extremely high SCOP thanks to intelligent adjustment algorithms
• Possible access to the Thermal Account and tax deductions

WIDE RANGE OF ACCESSORIES

• Solar health integration
• Electric back-up heating with modular power
• Integrative electrical resistance
• Mixed group complete with servomotor
• Inertial storage from 30 l

5 warranty years by entering into a contract
scheduled maintenance with our CAT.

Features and Models

USA B	Pot fridge *	EER	Pot term.	COP	Nutrition	Energy efficiency class
						MT - BT
04 M	4,47 kW	5,58	4,23 kW	5,21	230 / 1 / V 50	A ++ \| A ++
06 M	6,19 kW	4,80	6,33 kW	4,83	230 / 1 / V 50	A ++ \| A ++
08 M	8,01 kW	4,43	8,09 kW	4,57	230 / 1 / V 50	A ++ \| A ++
12 M	11,4 kW	4,40	12,2 kW	4,79	230 / 1 / V 50	A ++ \| A ++
12 T	11,4 kW	4,40	12,2 kW	4,79	400 / 3 / V 50	A ++ \| A ++
16 M	15,4 kW	4,33	15,8 kW	4,81	230 / 1 / V 50	A + \| A ++
16 T	15,4 kW	4,33	15,8 kW	4,81	400 / 3 / V 50	A + \| A ++

Terms of reference:
Cooling: A35 / W18
Heating: A7 / W35 (EN 14511)

Fill out the form for a quote or information

Design

Technical data Air Inverter II - T

Features and Models

SIZES	UM	04M	06M	08M	12M / T	16M / T
VERSIONS		IN-TB	IN-TB	IN-TB	TB	TB
HEATING Inlet / outlet water use side 30 / 35 ° C - Source side air 7 ° C (UR = 85%)
Thermal power	kW	4,23	6,33	8,09	12,16	15,77
Total input	kW	0,81	1,31	1,77	2,54	3,28
COP	-	5,21	4,83	4,57	4,79	4,81
Water flow	l / s	0,20	0,30	0,39	0,56	0,74
Maximum useful prevalence	kPa	71,0	63,0	55,0	78,0	54,0
HEATING Inlet / outlet water use side 30 / 35 ° C - Source side air 7 ° C (UR = 85%)
Thermal power	kW	4,78	5,68	6,09	9,76	12,06
Total input	kW	1,56	1,95	2,18	3,32	4,14
COP	-	3,06	2,91	2,79	2,94	2,91
Water flow	l / s	0,23	0,27	0,29	0,45	0,56
Maximum useful prevalence	kPa	71,0	63,0	55,0	78,0	54,0
HEATING Inlet / outlet water use side 30 / 35 ° C - Source side air 7 ° C (UR = 85%)
Thermal power	kW	4,06	6,00	7,29	12,22	16,44
Total input	kW	1,10	1,65	2,15	3,35	4,42
COP	-	3,69	3,64	3,39	3,65	3,72
Water flow	l / s	0,19	0,29	0,35	0,57	0,77
Maximum useful prevalence	kPa	72,0	65,0	53,0	82,0	62,0
COOLING Water inlet / outlet side of use 18 / 23 ° C - Air on source side 35 ° C
Thermal power	kW	4,47	6,19	8,01	11,39	15,40
Total input	kW	0,80	1,29	1,81	2,59	3,56
COP	-	5,58	4,80	4,43	4,40	4,33
Water flow	l / s	0,21	0,30	0,38	0,54	0,74
Maximum useful prevalence	kPa	71,0	63,0	55,0	78,0	54,0
COOLING Water inlet / outlet side of use 7 / 12 ° C - Air on source side 35 ° C
Cooling capacity	kW	4,34	6,24	7,57	11,34	15,53
Total input	kW	1,27	2,05	2,73	4,25	5,71
EER	-	3,42	3,05	2,77	2,67	2,72
ESEER	-	4,82	4,58	3,85	4,32	4,02
Water flow	l / s	0,21	0,30	0,36	0,54	0,74
Maximum useful prevalence	kPa	71,0	63,0	55,0	78,0	54,0
Total power consumption and performance according to EN 14511: 2013

Operating limits

Cooling, heating and domestic hot water Air Inverter II - T.

Twu (° C): exchanger outlet water temperature
Tae (° C): outdoor air temperature
(1) Normal operating range
(2) Operating range with the use of resistance

ΔP (kPa): useful prevalence
Q (l / s): water flow rate
Pel (W): absorbed electrical power

Dimensional units

DIMENSIONAL EXTERNAL UNIT 04 M - 06M

Dimensional units Inverter IN External

Size - UM - 04 M - 06 M

Operating weight - kg - 60 - 60
Shipping Weight - kg - 72 - 72

1 Compressor compartment
2 Electrical panel
3 Power line input
4 Condensate drain
5 Suction attachment 5 / 8 ”
6 Liquid connection 3 / 8 ”
7 Functional spaces
8 Electric fan

DIMENSIONALS EXTERNAL UNIT 08 M

Dimensional units Inverter IN External 08

Size - UM - 08 M

Operating weight - kg - 76
Shipping Weight - kg - 88

1 Compressor compartment
2 Electrical panel
3 Power line input
4 Condensate drain
5 Suction attachment 5 / 8 ”
6 Liquid connection 3 / 8 ”
7 Functional spaces
8 Electric fan

DIMENSIONAL EXTERNAL UNIT 12 M / T

dimensional 12

Size - UM - 12 M / T - 16M / T

Operating weight - kg - 115 - 115
Shipping Weight - kg - 128 - 128

9. Compressor compartment
10. Electrical cabinet
11. Power line entry
12. Condensate drain
13. Liquid line connections
14. Gas line connections
15. Functional spaces
16. electric fan

Installation

Indicative hydraulic scheme

The system components must be defined by the designer and installer (eg Vents, taps, calibration / safety valves etc.).

1	Refrigerant line (gas)	S	Condensate drain and safety valves Ø 1 ¼ "
2	Refrigerant line (liquid)	VR	Check valve *
3	Domestic hot water outlet Ø ¾ "	FI	System filter (supplied as standard)
4	Aqueduct entrance Ø ¾ "	F	Water filter *
5	Plant water delivery Ø ¾ "	PA	Limescale protection *
6	System water return Ø ¾ "	RID	Pressure reducer *
7	Plant water delivery to Ø ata ”(2 raise) option		Vent *
8	System water return Ø acqua ”(2 raise) option		Shut-off valves
9	Domestic water recirculation		* At the customer's charge

Multi-function keyboard

	Heat pump	Compressor operation percentage	A	Unit LEDs Fixed ON Flashing OFF
	Primary pump active	Cooling	B	Alarm signaling LED
	Sanitary water production	Heating	in the morning	System delivery temperature
	Non-timed compressor	antilegionella	in the morning	System setpoint
	Timed compressor	Domestic hot water recirculation	in the morning	Current DHW temperature
	defrosting	Solar panels (if present)	in the morning	ACS setpoint
	Plant	Programming	in the morning	Solar exchanger inlet temperature
ACCESS	Plant status	Alarm in progress

Controls:

Comfort (sets the system water set-point for optimal comfort in the room)
Economical (optimizes the system water set-point for lower energy consumption)
Automatic programmed (operation based on the weekly schedule + health schedule)
Only sanitary (the unit is active only for the production of domestic hot water)