Description
STDC is the control unit for the management of simple solar systems with 1 tank. And 'precise, intelligent and easy to use thanks to its preconfigured and especially thanks the server to start up, especially clear and intuitive.
Indicated to manage solar systems with a reservoir.
The large easy to read display provides analysis of your plumbing and possible solutions to improve the comfort and energy savings.
- high-contrast display with intuitive graphical
- Multilingual menu
- Comfort function for fast heating
- Data storage with statistics and graphic analysis
- control program for drainage arrangements (drain-back)
Easy setup
In each unit there is the 'assistant for commissioning, A program that allows you to configure your system with maximum efficiency.
The setup wizard will guide you into operation quickly, according to a logical sequence through the settings required for proper operation.
Buttons are pressed, the information will be displayed on the display in the form of text or symbol.
Features
Model characteristics
|
STDC |
| probe inputs |
3 |
| Probes including |
2 |
| Relay output |
1 |
| Outputs 0-10V / PWM |
1 |
| Can-bus |
DO NOT |
| control LED operating status |
SI |
| Dimensions H x W x D (mm) |
115x86x45 |
STDC controller Overview
| Main technical features |
STDC |
| Number of applications |
9 |
| Statistical and graphical data analysis memory |
<br>• |
| Real time clock with battery backup |
<br>• |
| the thermostat function with time and temperature |
<br>• |
| Legionella prevention with solar |
<br>• |
Prevention of legionella
additional heating |
<br>• |
| Conditioning |
<br>• |
| Setup Wizard |
<br>• |
| Protection system |
<br>• |
| collector protection |
<br>• |
| memory protection |
<br>• |
| frost protection |
<br>• |
| blocking protection |
<br>• |
| Cooling |
<br>• |
| boot logic for vacuum collectors |
<br>• |
control program for plants
to drain (drain-back) |
<br>• |
Control functions and error
memory with date and time |
<br>• |
| Menu Lock |
<br>• |
| Data saved on the microSD card |
- |
| Connection via CAN BUS |
- |
| Ethernet connection |
- |
| Class of protection |
IP40 |
Installation
Easy installation of the solar control
The connection terminals are firmly bound to the bottom of the housing.
Before starting the unit, unplug the power supply and make sure that it does not go-around! Check the absence of power! The electrical connections can be made only by qualified personnel and in compliance with relevant regulations. Do not use the controller if the housing shows visible damage, eg., Cracks.
installation guide
1. Select the program / hydraulics see.
2. Open the cover of the terminal area
3. Uncover the cables by a maximum of 55 mm, fix the reinforcement bands, strip the last 8-9 mm of the wires
4. Open the terminals with a suitable screwdriver (figure 2) and connect the electrical system to the control unit.
5. Reattach the terminal block area cover and close with the screw.
6. Turn on the power and put the controller into operation.
assistant startup
The start help guide the user, in a logical sequence through the settings required for proper operation.
In this way, they avoid errors and the programming is simplified.
The display of the measured values and the operating conditions can be displayed in a graphic mode with animations.
Important functions are displayed as icons on the display.
For each day of the week can be set 3 operating time bands, so for each time slot may be of predetermined temperature settings.
Time periods can be copied and used on other days.
The self-explanatory menu enables simple parameter setting and explanation on the display.
Values can be set for both day and night use.
The control functions and system monitoring are possible due to the recording and analysis of data.
The curve is used to obtain a more comfortable temperature in different types of construction.
Schemes
hydraulic systems
The STDC climate control unit has pre-configured 9 basic systems with additional functions for dry contacts.
Accessories
Probes PT 1000
The STDC control units are equipped with temperature probes PT1000. These are suitable to be used as environment sensors and external probes in to heating systems.
The use of this probe is shown especially in systems in which need high accuracy and stability and a high temperature range.
The temperature probes with PT1000 sensor elements guarantee detection accuracy in accordance with DIN EN60751 (IEC751). The sensors ensure precise acquisition of the temperature difference and optimal use of energy.
Download
Prices, catalogs, brochures
After starting the software provide the number on the screen and send it to the email
attivazione@rossatogroup.com
Contact us
Contact us for a quote or information
