it Italian en English
 

Contact now

invalid value
invalid value
invalid value
invalid value
Invalid value, do not insert the (country code +39)
invalid value
invalid value
invalid value
invalid value
invalid value
invalid value
  1. The installation of the control unitunscrew the cover screw.
  2. Carefully pull the upper part of housing from lower.
  3. Put away the top, making sure not to touch the electronics.
  4. Secure the bottom of the unit to the desired location and mark the holes 3. Make sure the wall surface is as even as possible so that the housing does not become distorted when it is screwed on.
  5. Using a drill with drill bit 6, 3 make holes at the points marked on the wall and push in the plugs.
  6. Insert the upper screw and screw it in slightly.
  7. Secure the top of the housing and insert the other screws.
  8. Align the housing and tighten the screws.

Rossato Group Srl
Via del Murillo, km 3.500, 04013 Sermoneta LT - Italy
Share capital € 200.000,00 fully paid up - no. REA LT-107494
VAT-CF IT01745300598

Working Time
From Monday to Friday
Morning 8: 30 - 12: 30
Afternoon 13: 30 - 17: 30